Station Features and Operation (PT/SLT)
User Manual 225
To talk to the original party while holding the third party
To put both parties on hold
Conditions
• Conference call arrangement
A conference call can be one of the following three arrangements:
1-inside and 2-outside; 2-inside and 1-outside; and 3-inside.
• Conference trunk
Up to eight conference calls are available at a time by default. If optional TSW Conference
Expansion card is installed, up to 64 conference calls are available at a time.
• Executive Busy Override, Privacy Release
A 3-party conference call is also established by Executive Busy Override or Privacy
Release.
• Confirmation tone
When a 2-party call is changed to a 3-party conference call and vice versa, a confirmation
tone is sent to all three parties. Eliminating the tone is programmable.
•
Pressing a CO button which is not in the conference, allows you to exit from the conference
SLT
Talk to the original party.
Flash the switchhook.
Confirmation tone
(optional)
PT
Press HOLD.
HOLD
For an ICM type PT, this operation is available only when at
least one party is on a CO line.
For a DN type PT, this operation is available only when the
extension user established the conference call using two
different line access buttons. (Not available when only one
button is used.)
To Next Page
Loading...
