Station Features and Operation (PT/SLT)
226 User Manual
leaving the other two parties connected unless they both are on CO lines. If they both are
on CO lines, they will be disconnected.
•
You can return to the original party before the third party answers by pressing the
TRANSFER button.
• If a CONF button is not provided on your PT, it can be assigned to a flexible (CO, DSS, PF)
button by Station, User or System Programming.
• Call Splitting
During a 3-party conference call, the conference originator can talk to either one of other
two parties alternately by pressing the TRANSFER button (for PT user) or flashing the
switchhook (for SLT user). In this case, the PT user is connected with the latter party first
and the SLT user is connected with the previous party first.
•
If "Released Link Operation" is enabled on your extension by System Programming, you
cannot establish a conference call.
Programming Guide References
• 2.4 Class of Service (COS)
– Released Link Operation
• 2.8 System Option
– Confirmation tone for Override, Barge-in, Conference and Privacy Release
• 4.3 Extension Line
– CO Key
– PF Key
• 4.4 DSS Console
– DSS Key
– PF Key
Features Guide References
1.6 Originating Features
• Executive Busy Override
1.10 Holding Features
• Call Splitting
1.12 Conversation Features
• Conference, 3-Party
• Conference, 5-Party
• Conference, Unattended
• Privacy Release
To Next Page
Loading...
