Panasonic KX-TD500 - Page 528

DSS Console Features
528 User Manual
a) Account Button
b) Another DSS Button (Every DSS button can be assigned to another extension number.)
c) Answer Button
d) Conference (CONF) Button
e) FWD/DND Button
f) Group-CO (G-CO) Button
g) Live Call Screening (LCS) Button
*1
h) Live Call Screening (LCS) Cancel Button
*1
i) Message Waiting (Owner Extension) Button
j) Message Waiting (Another Extension/Phantom Extension) Button
*2
k) One-Touch Dialing Button
l) Release Button
m)SAVE Button
n) Single-CO (S-CO) Button
o) Tone Through Button
p) Two-Way Record Button
*1
q) Two-Way Transfer Button
*1
r) Voice Mail (VM) Transfer Button
• PF buttons can be changed to any of the following feature buttons by Station, User or
System Programming:
a) Account Button
b) Answer Button
c) Conference (CONF) Button
d) FWD/DND Button
e) One-Touch Dialing Button
f) Release Button
g) SAVE Button
• When the STORE button is pressed after programming, you will hear beep tones as follows.
—One beep: The entry is changed from one that was stored previously.
—Two beeps: The entry is the same as one stored previously.
Programming Guide References
• 4.4 DSS Console
– Paired Extension
– DSS Key
– PF Key
*1
Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic Voice
Processing System (one that supports Digital Proprietary Telephone [DPT] integration; e.g., KX-TVS100).
*2
Can only be assigned by System Programming.