Panasonic KX-TD500 - Page 53

Station Programming
User Manual 53
Confirming the assigned data on the Flexible button
—Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
—To exit Station Programming mode: Press [PROGRAM].
—If you wish to change the data, follow the programming procedure explained in this section.
Clearing the data on the Flexible button
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit Station Programming mode: Press [PROGRAM].
—The following lists are the buttons and programming access numbers used for Station
Programming. Detailed operating instructions are explained on each page in this section.
The display shows the initial programming mode.The display shows the current status.
PT
Press HOLD (END).
Press the desired Flexible
(CO,DSS,PF) button.
HOLD
PT
Press the desired Flexible
(CO, DSS, PF) button that
you wish to cancel the
assignment.
Dial 2.
Press STORE.
AUTO DIAL
STORE
2
The STORE indicator lights.
The display shows the initial programming mode.