Appendix
544 User Manual
Examples – in Station Programming mode
English Display French Display Description
Account COMPTE Account button is assigned.
C.W. Tone1 TON.APPEL1 Select Call Waiting tone.
Clear Ready? ANNULER DONNEES? Available to clear Station Programming data.
CO-10101 LR-10101 Single-CO (S-CO) button is assigned.
Conference CONFERENCE Conference (CONF) button is assigned.
1400:CO Lock 1400:LR VERR. Complete to lock the outside calls of other
extension.
— "Remote Station Lock Control."
1400:ICM Lock 1400:INTCM VERR. Complete to lock the intercom calls of other
extension.
— "Remote Station Lock Control."
1400:Unlock 1400:DEVERR. Cancel "Remote Station Lock Control"
Ext-1234 PST-1234 DSS button is assigned.
FWD/DND RNV/NPD FWD/DND button is assigned.
Hands-free:Off MAINS LIB.:NON Disable "Full One-Touch Dialing" mode.
Hands-free:On MAINS LIB.:OUI Enable "Full One-Touch Dialing" mode.
Handset COMBINE Select Handset mode.
Headset CASQUE Select Headset mode.
10101 <=>EXT1001 10101 <=> PST1001 Confirm jack number and extension number.
Loop-CO BOUCLE DE LR Loop-CO (L-CO) button is assigned.
Message Waiting MESS. EN ATTENTE Message Waiting (Owner Extension) button
is assigned.
MW-1234 MW-1234 Message Waiting (Another Extension/
Phantom Extension) button is assigned.
DAY/NIGNT JOUR/NUIT Day/Night button is assigned.
Not Stored NON MEMORISE No programming is assigned.
Pref.In :CO-02 ENT.PREF:LR-02 Select "Prime Line (Outside Line) Preference
— Incoming."
Pref.In :No ENT.PREF:NON Select "No Line Preference — Incoming."
Pref.In :Ring ENT.PREF:SONN Select "Ring Line Preference — Incoming."
Pref.Out:CO-02 SOR.PREF:LR-02 Select "Prime Line (Outside Line) Preference
— Outgoing."
To Next Page
Loading...
