Panasonic KX-TD500 - Page 67

Station Programming
User Manual 67
Group Log-In / Log-Out Button (Assignment)
Allows you to assign a Flexible (CO) button as a Group Log-In / Log-Out button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• You cannot enter non-existent extension or a floating directory number.
*1
Please refer to "Floating Station" of Section "1.3 System Features" in the Features Guide.
Programming Guide References
• 3.5 Incoming Group
– FDN
– Group Type
*1
A Floating Directory Number (FDN) is a virtual extension number which appears to be an extension.
•
PT
Dial 79. Enter FDN of Incoming
group (3 or 4 digits).
FDN
Press the desired Flexible
(CO) button you wish to
assign as the Group
Log-In / Log-Out button.
Press STORE.
AUTO DIAL
STORE
<PT Display Example>
<PT Display Example>
(-xxxx:Incoming group number)
To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the
Station Programming mode.)
G-Login FDN-
CLR
G-Login FDN-xxxx
CLR
• The STORE indicator lights.
• The display shows the initial
programming mode.
7 9
(CO)