Panasonic KX-TD500 - Page 68

Station Programming
68 User Manual
Group-CO (G-CO) Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as a Group-CO button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• A G-CO button assigned to a DSS button is available for monitoring the call activity only,
not available for making or receiving a call.
PT
Press the desired Flexible
(CO, DSS) button you wish
to assign as a G-CO button.
Dial #.
Press STORE.
Enter the trunk group
number
(01 through 48).
trunk group no.
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial
programming mode.
To erase an incorrect entry, press the CLR (S2)button or the TRANSFER (CLEAR)button.
(The TRANSFER button becomes the CLEAR button in the Station Programming mode.)
<PT Display Example>
TRK GRP-
CLR