Panasonic KX-TD500 - Page 81

Station Programming
User Manual 81
– [EXT No.1] Group No.
– [EXT No.2] DN
– [EXT No.2] Group No.
Voice Mail (VM) Transfer Button (Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as a VM Transfer button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• You cannot enter non-existent extension or a floating directory number.
*1
Please refer to "Floating Station" of Section "1.3 System Features" in the Features Guide.
Programming Guide References
• 3.3 Extension Group
– FDN
– Group Type
• 5.10 VPS Integration
*1
A Floating Directory Number (FDN) is a virtual extension number which appears to be an extension.
<PT Display Example>
<PT Display Example>
(-xxxx:VM extension number)
To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the Station
Programming mode.)
VTR-
CLR
VTR-xxxx
CLR
PT
Press the desired Flexible
(CO, DSS, PF) button you
wish to assign as the VM
Transfer button.
Dial 8.
Press STORE.
Enter the Voice Mail
extension number
(3 or 4 digits).
Voice Mail
extension no.
AUTO DIAL
STORE
8
The STORE indicator lights.
The display shows the initial
programming mode.