Drive / Shutter / Image Stabilizer – Taking Burst Pictures
221
• It may take a while to save burst pictures.
If you continue to take burst pictures while saving is in progress, the maximum
number of frames recordable will be reduced.
When taking burst pictures, we recommend using a high-speed card.
• Taking burst pictures does not work while you are using the following function:
– [Live View Composite]
Notes on SH burst recording
• [Shutter Type] is fixed to [ELEC.].
• There are limits on the shutter speed you can set during SH burst recording.
– [SH75]/[SH75 PRE]: To a minimum of 1/80
– [SH60]/[SH60 PRE]: To a minimum of 1/60
– [SH20]/[SH20 PRE]: To a minimum of 1/60
• The aperture will be fixed during burst recording.
• The images recorded will be saved as a set of burst group pictures. (Group
Images: 498)
• When the focus mode is set to [AFC], [SH75]/[SH75 PRE] is not available.
To Next Page
Loading...
