Drive / Shutter / Image Stabilizer – Taking Burst Pictures
222
Notes on SH pre-burst recording
• Pictures taken before the shutter button is pressed fully are not saved in the
following cases:
– When recording with the Touch Shutter
– When [Half-Press Shutter] in the [Custom] ([Focus/Shutter]) menu is set to
[ON]
• When the ambient temperature is high or Pre-Burst recording is performed
continuously, even if you press the shutter button halfway, Pre-Burst may not
operate to protect the camera from overheating. Wait until the camera cools
down.
• Even if you press the shutter button halfway, Pre-Burst may not operate when
there is insufficient free space on the card.
To Next Page
Loading...
