Camera Customization – [Custom] Menu
584
[I.S. Status Scope]
[ON] / [OFF]
Displays a reference point (C) on the recording screen in order to let you check for
camera shake.
• [I.S. Status Scope] does not work in the following cases:
– When [Operation Mode] in [Image Stabilizer] is set to [OFF]
– When the O.I.S. switch on the lens is [OFF]
• When the following functions are being used, [I.S. Status Scope] is not available:
– Video recording
– High Resolution mode (when [Handheld High-Res] is set to [OFF])
To Next Page
Loading...
