Camera Customization – [Custom] Menu
585
[Level Gauge]
[ON] / [OFF]
Displays the level gauge which is useful in correcting camera tilt.
(D) Horizontal
(E) Vertical
(F) Green (no tilt)
• Even after correcting the tilt, there may still be an error of approx. ±1o.
• When the camera is tilted significantly upwards or downwards, the level gauge
may not be displayed correctly.
• You can adjust the level gauge and reset the adjusted values in [Level Gauge
Adjust.] in the [Setup] ([Monitor / Display]) menu. ([Level Gauge Adjust.]: 606)
To Next Page
Loading...
Need help?
General
