7. Flash
188
5
Press 3/4 to select [Wireless Channel] and then press [MENU/SET].
6
Press 3/4 to select the channel and then press [MENU/SET].
• Select the channel you have set for the external flashes in step 1.
7
Press 3/4 to select [Wireless Setup] and then press [MENU/SET].
8
Press 3/4 to select an item and then press [MENU/SET].
• Press the [DISP.] button to fire a test-flash.
A Firing Mode
B Flash output
C Luminosity ratio
To Next Page
Loading...
