273
10. Using the Wi-Fi/NFC Function
Printing Wirelessly
∫ Methods for sending and images that can be sent
•
Some images may not be sent depending on the device.
• For details on how to send images, refer to P299.
1 Select the menu.
2 Select [Via Network] or [Direct], and connect. (P292)
3 Select a printer you want to connect.
4 Select pictures, and then print.
•
The procedure for selecting pictures is the same as the one for when the USB connection
cable is connected.
For details, refer to P339.
• To change the setting or disconnect, press [Wi-Fi]. (P256)
Not available in these cases:
•
Motion pictures cannot be printed out.
You can send images to a compatible printer, and print
them wirelessly.
JPEG RAW MP4
AVCHD
MP4
(LPCM)
MOV 3D
Select and send the images
([Send Images Stored in the Camera])
± —— — — ——
Preparations:
•
You can print out recorded pictures wirelessly from a PictBridge (wireless LAN-compatible)
¢
printer.
¢ Compliant with the DPS over IP standards.
For details on the PictBridge (wireless LAN-compatible) printer, contact the respective
company.
> [New Connection] > [Send Images Stored in the Camera] > [Printer]
To Next Page
Loading...
