2. Getting Started/Basic Operations
58
Configuring basic settings of this unit (Setup Menu)
Format the card before recording a picture with this unit.
Since data cannot be recovered after formatting, make sure to back up necessary
data in advance.
Select the menu. (P54)
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
• Use a battery with sufficient battery power or the AC adaptor (optional) (P353) when formatting.
Do not turn the camera off during formatting.
• If the card has been formatted on a PC or other equipment, format it on the camera again.
• If the card cannot be formatted, please try another card before contacting Panasonic.
The recording or setup/custom settings are reset to the default.
Select the menu. (P54)
•
Confirmation screens are displayed in the sequence of the [Rec] settings and the [Setup]/
[Custom] settings. It is executed when [Yes] is selected.
• When the recording setting is reset, the content of the following settings is also reset.
– The [Face Recog.] setting
• When the setup/custom settings are reset, the following settings are also reset.
– The [World Time] setting
– The settings of [Travel Date] (departure date, return date, location)
– The [Profile Setup] setting
– The settings of [Rotate Disp.], [Picture Sort] and [Delete Confirmation] in the [Playback] menu
• If you changed [System Frequency] in the [Setup] menu, a message prompting you to restart
the camera will be displayed after the camera is reset. Turn off and on the camera.
• The folder number and the clock setting are not changed.
Formatting the card (initialization)
> [Setup] > [Format]
Restoring the default settings ([Reset])
> [Setup] > [Reset]