9. Playing Back and Editing Images
232
You can write location information sent from a smartphone/tablet (latitude and longitude)
on images.
•
You can send location information and write it on images using a smartphone/tablet.
(P267)
• You need to install “Panasonic Image App” on your smartphone/tablet. (P258)
• Read the [Help] in the “Image App” menu for further details on how to operate.
Preparation:
Sending location information to the camera from the smartphone/tablet.
1 Select the menu. (P54)
2 Press 3/4 to select the period you intend to record location information on
images, then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
• Images with location information are indicated with [ ].
∫ To pause the recording of location information
Press [MENU/SET] while recording of the location information onto images is taking
place.
•
During a suspended period, [±] is displayed.
Select the period with [±] to restart the recording process from the picture you left off.
∫ To delete the received location information
1 Select the menu. (P54)
2 Press 3/4 to select the period you want to delete, then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
• Location information can be written only to images taken on this camera.
Not available in these cases:
•
Location information will not be written on pictures taken after the location information had been
sent (P267).
• Location information is not written onto the images recorded when [Rec Format] is set to
[AVCHD].
• When there is insufficient free space on the card of the camera, location information might not
be able to be written.
• Location information cannot be written on images that were recorded when the clock was not
set.
[Location Logging]
> [Playback] > [Location Logging] > [Add Location Data]
> [Playback] > [Location Logging] > [Delete Location Data]
To Next Page
Loading...
