8. Recording Motion Pictures
218
You can reduce flickering and horizontal stripes on images in Creative Video Mode. By
fine-adjusting the shutter speed, you can reduce flickering and horizontal stripes that
appear on the camera’s image when recording the screen of a TV or PC.
•
This function is available when [Exposure Mode] is set to either [S] or [M] in Creative
Video Mode.
1 Select the menu. (P54)
2 Select [ON] with 3/4, and then press [MENU/SET].
3 Select Shutter Speed with 2/1, and then press
[MENU/SET].
A Shutter speed
• You can fine-adjust the shutter speed.
• Adjust the shutter speed while looking at the screen so that
flickering and horizontal stripes will be minimized.
• If you press and hold 2/1, the shutter speed will be
adjusted faster.
• You can also adjust the shutter speed setting on the
recording screen in increments finer than the normal adjustment method.
∫ Canceling [Synchro Scan]
Select the [OFF] setting in step
2.
•
When you set [Synchro Scan] to [ON], the available shutter speed range becomes narrower.
The shutter speed range differs depending on the settings of [Rec Quality], [Variable Frame
Rate], and others.
Reducing flickering and horizontal stripes on images ([Synchro Scan])
Applicable modes:
> [Motion Picture] > [Synchro Scan]
MENU
To Next Page
Loading...
