311
11. Customizing the Camera’s Settings
For details on how to select the [Custom] menu settings, refer to P54.
•
When [Duration Time] is set to [HOLD], [Playback Operation Priority] is fixed to [ON].
Switching the display method of the viewfinder
[LVF Disp.Style] > [ ]: viewfinder style/[ ]: monitor style
Switching the display method of the monitor
[Monitor Disp. Style] > [ ]: viewfinder style/[ ]: monitor style
Displaying/not displaying the on-monitor recording information screen
[Monitor Info. Disp.] > [ON]/[OFF]
Switching between the angle of view for taking pictures and the one for recording
motion pictures
[Rec Area] > [!]
(Picture)/[ ] (Motion picture)
•
When the aspect ratio setting is different in still and motion pictures, the angle of view
changes at the start of motion picture recording.
When [Rec Area] is set to [ ], angle of view during motion picture recording is displayed.
• The recording area indicated is an approximation.
Switching screens to those suitable for motion picture recording
[Video-Priority Display]
Refer to P211 for details.
Displaying a picture right after it is taken
[Auto Review]
[Duration Time]
Set the length of time that the picture is displayed after taking the
still picture.
[HOLD]:
The pictures are displayed until shutter button is pressed halfway.
[5SEC]/[4SEC]/[3SEC]/[2SEC]/[1SEC]/[OFF]
[Playback Operation
Priority]
[ON] Switching the display of the playback screen, deleting
pictures, etc. are possible during [Auto Review].
[OFF] Button operations during [Auto Review] become the
same as those for recording.
To Next Page
Loading...
