10. Using the Wi-Fi/NFC Function
278
1 Select the menu.
2 Select [Via Network] or [Direct], and connect. (P292)
3 Select the PC you want to connect to.
•
When the PC you want to connect to is not displayed, select [Manual Input], and enter the
computer name of the PC (NetBIOS name for Apple Mac computers).
4 Select the folder you want to send.
•
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.]. (P301)
5 Take pictures.
•
To change the setting or disconnect, press [Wi-Fi]. (P256)
You cannot change the settings while sending pictures. Wait until sending is complete.
Sending an image each time a recording is made ([Send Images While
Recording])
> [New Connection] > [Send Images While Recording] > [PC]
To Next Page
Loading...
