351
13. Others
• While the external microphone is connected, [ ] is displayed on the screen.
• When the external microphone is connected, [Mic Level Disp.] (P208) is automatically set to
[ON], and the mic level is displayed on the screen.
• When an external microphone is attached to the camera, do not hold only the external
microphone to prevent the camera from falling.
• [Wind Cut] in the [Motion Picture] can reduce the wind noise effectively.
• When an external microphone is attached to the camera, do not open the built-in flash.
• If the noises are recorded when you use an AC adaptor (optional), use a battery.
• When a stereo shotgun microphone (VW-VMS10: optional) is used, [Special Mic.] is fixed to
[STEREO].
• When [Special Mic.] is set to [LENS AUTO], [S. SHOTGUN] or [MANUAL], [Sound Output] in
the [Motion Picture] menu is fixed to [REC SOUND].
• If you press the function button to which [Mic. Directivity Adjust] in [Fn Button Set] (P317) in the
[Custom] menu is assigned when [Special Mic.] is set to [MANUAL], the screen that lets you set
the range will be displayed.
• [LENS AUTO] is available only when a lens based on the Micro Four Thirds System standard/
Four Thirds System standard is used. If your lens is based on the Micro Four Thirds System
standard/Four Thirds System standard but does not have a communication function with the
camera, [LENS AUTO] is not available.
• For details, refer to the operating instructions of the external microphone.
To Next Page
Loading...
