Panasonic PT-REQ12 Series

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 149
Deleting a lens memory
1) Press as to select [LENS].
2) Press the <ENTER> button.
f The [LENS] screen is displayed.
3) Press as to select [LENS MEMORY].
4) Press the <ENTER> button.
f The [LENS MEMORY] screen is displayed.
5) Press as to select [LENS MEMORY EDIT].
6) Press the <ENTER> button.
f The [LENS MEMORY EDIT] screen is displayed.
7) Press as to select [LENS MEMORY DELETE].
8) Press the <ENTER> button.
f The [LENS MEMORY DELETE] screen is displayed.
f The name of the saved lens memory and its lens position information ([VERTICAL POSITION] /
[HORIZONTAL POSITION] / [FOCUS POSITION] / [ZOOM POSITION] / [PERIPHERY FOCUS POSITION])
are displayed in the [LENS MEMORY DELETE] screen.
9) Press as to select the item to delete, and press the <ENTER> button.
f The conrmation screen is displayed.
10) Press qw to select [OK], and press the <ENTER> button.
Note
f The numeric value information of the periphery focus position is displayed only in following cases.
g ET-C1W300, ET-C1W400, ET-C1W500
Changing the lens memory name
1) Press as to select [LENS].
2) Press the <ENTER> button.
f The [LENS] screen is displayed.
3) Press as to select [LENS MEMORY].
4) Press the <ENTER> button.
f The [LENS MEMORY] screen is displayed.
5) Press as to select [LENS MEMORY EDIT].
6) Press the <ENTER> button.
f The [LENS MEMORY EDIT] screen is displayed.
7) Press as to select [LENS MEMORY NAME CHANGE].
8) Press the <ENTER> button.
f The [LENS MEMORY NAME CHANGE] screen is displayed.
f The name of the saved lens memory and its lens position information ([VERTICAL POSITION] /
[HORIZONTAL POSITION] / [FOCUS POSITION] / [ZOOM POSITION] / [PERIPHERY FOCUS POSITION])
are displayed in the [LENS MEMORY NAME CHANGE] screen.
9) Press as to select the name to change, and press the <ENTER> button.
f The [LENS MEMORY NAME INPUT] screen is displayed.
10) Press asqw to select the text, and press the <ENTER> button to enter the text.