Chapter 4 Settings — [NETWORK] menu
ENGLISH - 207
3) Press as to select [Art-Net CHANNEL SETTING].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[2] Uses the channel assignment in standard setting.
[USER] Changes the channel assignment.
[1]
Uses the channel assignment with DZ21K series compatible.
DZ21K series: DZ21K series, DS20K series, DW17K series, DZ16K series
f When anything other than [USER] is selected, the control details assigned to the channel is displayed by
pressing the <ENTER> button. For details, refer to “Using Art-Net function” (x page 269).
f Proceed to Step 5) when [USER] is selected.
5) Press the <ENTER> button.
f The [Art-Net CHANNEL SETTING] screen is displayed.
6) Press as to select the channel to set, and pressqw to switch the item.
[LIGHT OUTPUT] Adjusts the amount of light.
[INPUT SELECT] Switches the input.
[LENS POSITION] Moves the lens position.
[LENS H SHIFT] Adjusts the lens shift in the horizontal direction.
[LENS V SHIFT] Adjusts the lens shift in the vertical direction.
[LENS FOCUS] Adjusts the focus.
[PERIPHERY FOCUS] Adjusts the periphery focus.
[LENS ZOOM] Adjusts the zoom.
[POWER] Controls the power status.
[SHUTTER] Controls the shutter.
[FADE-IN] Sets the fade-in time.
[FADE-OUT] Sets the fade-out time.
[GEOMETRY] Performs geometric adjustment.
[CUSTOM MASKING] Performs geometric adjustment using a computer.
[FREEZE] Freezes the projected image.
[COLOR] Adjusts the color saturation.
[TINT] Adjusts the tint.
[RASTER PATTERN] Displays the raster pattern.
[ENABLE/DISABLE] Enables/disables the control of the projector with the Art-Net function.
[NONE] No denition
f The setting can be also made by pressing as to select the channel, pressing the <ENTER> button to
display the item list, pressing asqw to select the item, and pressing the <ENTER> button.
f Same item cannot be set for multiple channels, except for [NONE].
[Art-Net STATUS]
Display the content of control assigned to each channel and the received data of that channel.
1) Press as to select [Art-Net].
2) Press the <ENTER> button.
f The [Art-Net] screen is displayed.
3) Press as to select [Art-Net STATUS].
4) Press the <ENTER> button.
f The [Art-Net STATUS] screen is displayed.
To Next Page
Loading...
