Panasonic PT-REQ12 Series

Chapter 5 Operations — Using the web control function
ENGLISH - 221
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
14
18
20
7
10
8
9
1
2
3
4
21
5
6
11
12
13
16
19
17
15
1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [FIRMWARE VERSION]
Displays the rmware version of the projector.
3 [POWER]
Displays the status of the power.
4 [SHUTTER]
Displays the status of the shutter. ([CLOSE]: Shutter function
enabled; [OPEN]: Shutter function disabled)
5 [OPERATING MODE]
Displays the setting status of [OPERATING MODE].
6 [MAX LIGHT OUTPUT LEVEL]
Displays the setting status of [MAX LIGHT OUTPUT LEVEL].
7 [SERIAL NUMBER]
Displays the serial number of the projector.
8 [REMOTE2 STATUS]
Displays the control status of the <REMOTE 2 IN> terminal.
9 [OSD]
Displays the status of on-screen display function. ([ON]:
Display; [OFF]: Hide)
10 [AC VOLTAGE]
Displays the input supply voltage.
11 [LIGHT OUTPUT]
Displays the setting status of [LIGHT OUTPUT].
12 [INPUT]
Displays the status of the selected input.
13 [INTAKE AIR TEMPERATURE]
Displays the status of the intake air temperature of the projector.
14 [OPTICS MODULE TEMPERATURE]
Displays the status of the internal temperature of the projector.
15 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the
projector.
16 [LIGHT1 TEMPERATURE]
Displays the temperature status of light source 1.
17 [LIGHT2 TEMPERATURE]
Displays the temperature status of light source 2.
18 [LIGHT1]
Displays the lighting status and runtime of light source 1.
19 [LIGHT2]
Displays the lighting status and runtime of light source 2.
20 [SELF TEST]
Displays the self-diagnosis information.
21 [PROJECTOR RUNTIME]
Displays the runtime of the projector.