Chapter 7 Appendix — Specications
284 - ENGLISH
Acoustic noise
*1
PT-REQ12, PT-REQ12L
38 dB (when [OPERATING MODE] is set to [NORMAL]
or [ECO])
35 dB (when [OPERATING MODE] is set to [QUIET])
PT-REQ10, PT-REQ10L
36 dB (when [OPERATING MODE] is set to [NORMAL]
or [ECO])
33 dB (when [OPERATING MODE] is set to [QUIET])
PT-REQ80, PT-REQ80L
35 dB (when [OPERATING MODE] is set to [NORMAL]
or [ECO])
32 dB (when [OPERATING MODE] is set to [QUIET])
Operating
environment
Operating temperature 0 °C (32 °F) to 45 °C (113 °F)
*2*3*4
Operating humidity 10 % to 80 % (no condensation)
Operation position [FLOOR/CEILING], [FRONT/REAR]
Power requirements
100 V - 240 V ~ (100 V - 240 V alternating current), 50 Hz/60 Hz
Rated current
PT-REQ12, PT-REQ12L 10.4 A - 4.3 A
PT-REQ10, PT-REQ10L 8.8 A - 3.7 A
PT-REQ80, PT-REQ80L 7.7 A - 3.2 A
Maximum power consumption
PT-REQ12, PT-REQ12L 1 030 W
PT-REQ10, PT-REQ10L 870 W
PT-REQ80, PT-REQ80L 760 W
Standby mode power consumption
Approx. 12 W
When [STANDBY MODE] is set to [NORMAL]
f [QUICK STARTUP] function is disabled
f no Function Board attatched
f <DC OUT> terminal is not in use
Approx. 0.5 W when [STANDBY MODE] is set to [ECO]
Standard outside
dimensions
Width 498 mm (19-19/32") (excluding protrusions)
Height
212 mm (8-11/32") (with the feet at shortest position)
196 mm (7-23/32") (excluding the feet and protrusions)
Depth
PT-REQ12, PT-REQ10,
PT-REQ80
648 mm (25-1/2") (excluding protrusions, including
standard zoom lens)
PT-REQ12L, PT-REQ10L,
PT-REQ80L
538 mm (21-3/16") (excluding protrusions)
Weight
*5
PT-REQ12, PT-REQ10,
PT-REQ80
Approx. 28.7 k] (63.3 lbs.) (including standard zoom
lens)
PT-REQ12L, PT-REQ10L,
PT-REQ80L
Approx. 27.0 k] (59.5 lbs.) (excluding the optional lens)
Outer case
Materials Molded plastic
Color
Black model Black
White model White
Power cord length 3.0 m (118-1/8")
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2020 international standards.
*2 The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1 400 m
(4 593') and 4 200 m (13 780') above sea level. Note that altitude of 4 200 m (13 780') above sea level is the maximum height that the performance
of this projector is guaranteed.
*3 The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) when the optional Wireless Module (Model No.:
AJ-WM50 Series) is attached.
*4 When the operating environment temperature exceeds the following value, the light output may be reduced to protect the projector.
f When using the projector at an altitude lower than 1 400 m (4 593') above sea level: 35 °C (95 °F)
f When using the projector at an altitude between 1 400 m (4 593') and 2 700 m (8 858') above sea level: 30 °C (86 °F)
f When using the projector at an altitude between 2 700 m (8 858') and 4 200 m (13 780') above sea level: 25 °C (77 °F)
*5 Average value. Weight varies for each product.
To Next Page
Loading...
