Panasonic PT-REQ12 Series

Chapter 2 Getting Started — Setting up
46 - ENGLISH
Projection
lens Model
No.
Only [KEYSTONE] used
*1
[KEYSTONE] and [CURVED CORRECTION] used together
Only [CURVED
CORRECTION] used
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Min. value of
R2/L2
Min. value of
R3/L3
Min. value of
R2/L2
Min. value of
R3/L3
ET-C1W300 ±10 ±5 - - - - - -
ET-C1W400 ±16 ±10 - - - - - -
ET-C1W500 ±22 ±15 ±8 ±8 1.3 3.3 0.8 1.9
Standard
zoom lens/
ET-C1S600
±40 ±40 ±20 ±15 1.3 3.3 0.8 1.9
ET-C1T700 ±40 ±40 ±20 ±15 0.9 2.0 0.5 1.1
*1 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°.
Note
f When [GEOMETRY] is used, the focus of the entire screen may be lost as correction increases.
f Make the curved screen a circular arc shape with one part of a perfect circle removed.
f Adjustment range of the [GEOMETRY] items may not match the listed projection range depending on the projection lens. Use this projector
within the projection range, otherwise the correction may not work.