ENGLISH - 87
[Image Setup] page
1 [Aspect]
Switches the aspect of the projected image.
2 [Fine sync]
Adjusts the ne sync of the projected image.
3 [H Position]
Adjusts the horizontal position of the projected image.
4 [V Position]
Adjusts the vertical position of the projected image.
5 [H.Size]
Adjusts the total number of dots of the projected
image.
6 [Freeze]
Switches the freeze function between on and off.
7 [Auto PC adj.]
Executes the Auto PC adj. function.
8 [V Keystone]
Corrects the keystone in vertical direction.
9 [H Keystone]
Corrects the keystone in horizontal direction.
10 [Curved correction]
Corrects the pincushion or barrel of the projected
image.
11 [Corner correction]
Corrects the four corners of the projected image.
Chapter 5 Operation of Function - Web control function
To Next Page
Loading...
