12
4 Specifications
Q AMPLIFIER SECTION
RMS output power stereo mode
Front Ch (both channels driven)
125 W per channel (4 Ω), 1 kHz, 10% THD
Total RMS stereo mode power
250 W
PMPO output power (PN only)
2800 W
Q FM/AM TUNER, TERMINALS SECTION
Preset station FM 30 stations
AM 15 stations
Frequency Modulation (FM)
Frequency range
For PH only
87.50 to 108.00 MHz (50 kHz step)
For PN only
87.9 to 107.9 MHz (200 kHz step)
87.5 to 108.0 MHz (100 kHz step)
Antenna terminal (s)
75 Ω (unbalanced)
Amplitude Modulation (AM)
Frequency range
For PH only
522 to 1629 kHz (9 kHz step)
520 to 1630 kHz (10 kHz step)
For PN only
520 to 1710 kHz (10 kHz step)
AUX Input
RCA pin jack
Q DISC SECTION
Discs played (8 cm or 12 cm)
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3* formatted disc)
(3) MP3*
* MPEG-1 layer 3
Pick up
Wavelength 785 nm(CD)
Laser Power CLASS 1 (CD)
Audio output (Disc)
Number of channels 2 (FL, FR)
FL = Front left channel
FR = Front right channel
Q USB SECTION
USB Port
USB standard USB 2.0 full speed
Media file format support MP3 (*.mp3)
USB device file system FAT12, FAT16, FAT32
USB Port power 500 mA (max)
Q GENERAL
Power supply
For PH only
AC 110 to 127 V, 50 Hz
AC 220 to 240 V, 60 Hz
For PN only
AC 120 V, 60 Hz
Power Consumption
For PH only
64 W
For PN only
61 W
Dimensions (W x H x D) 250 mm x 336 mm x 245 mm
Mass 3 kg
Operating temperature range 0 °C to +40 °C
Operating humidity range 35% to 80% RH
(no condensation)
Power Consumption in standby
mode
For PH only 0.3 W (Approximate)
For PN only 0.2 W (Approximate)
Notes
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Q System: SC-AKX10PN-K
Main Unit: SA-AKX10PN-K
Front Speakers: SB-AKX10PN-K
Q System: SC-AKX10PH-K
Main Unit: SA-AKX10PH-K
Front Speakers: SB-AKX10PN-K
To Next Page
Loading...
