Panasonic SA-AKX10PH - Replacement of Rectifier Diode (D5702)

47
9.17. Replacement of Rectifier Diode
(D5702)
• Refer to “Disassembly of SMPS P.C.B.”.
9.17.1. Disassembly of Rectifier Diode
(D5702)
Step 1 Desolder pins of the Rectifier Diode (D5702) on the sol-
der side of SMPS P.C.B.
Step 2 Desolder pins of the Heatsink A.
Step 3 Remove 1 screw from the Switching Regulator IC
(IC5701).
Step 4 Remove the Heatsink A with Rectifier Diode (D5702).
Step 5 Remove 1 screw from the Rectifier Diode (D5702).
Step 6 Remove the Rectifier Diode (D5702) from the Heatsink
A.