Panasonic SA-AKX10PH - Page 18

18
6.2.2. Doctor Mode Table 2
FL Display
Key Operation
Front Key
Item
DescriptionMode Name
Cold Start
Volume Setting
Check
FL Display
Check
To active cold start upon next AC
power up when reset start is execute
the next time.
To check the volume setting of a main
unit.
To check the FL segment display
All segment will light up while all LED
blink at 0.5s,intervals.(if any)
In Doctor Mode:
1. Press [4] button on
remote control.
In Doctor Mode:
1. Press [7],[8],[9],[>10]
button on remote control.
In Doctor mode:
1. Press [2] button on
remote control.
Press [7]: VOLUME50
Press [8]: VOLUME35
Press [9]: VOLUME27
Press [>10]: VOLUME0
Volume
In this mode, the tray will open &
close.
Note: Refer to Section 6.3 Fig 1 for
process flow.
The counter will
increment by one.
When reach 9999
will change to 0000
Cancellation Display
DLS6 Reliability
Test (Loading)
To determine CD Mechanism Unit
(DLS6C) Open/Close operation.
In Doctor Mode:
1.Press [5] button on remote
control.
2.To cancel, press [0]
on remote control.
Note: Refer to Section 6.3 Fig 2. for
process flow.
The counter will
increment by one.
When reach 9999
will change to 0000
Cancellation Display
DLS6 Reliability
Test (Traverse)
To determine CD Mechanism DLS6C
Access Inner & Outer disc operation.
In Doctor Mode:
1.Press [6] button on remote
control.
2.To cancel, press [0]
on remote control.
Note: Refer to Fig. 6.3. for process
flow.
The counter will
increment by one.
When reach 9999
will change to 0000
Cancellation Display
DLS6 Reliability
Test
(Combination)
In Doctor Mode:
1.Press [DIMMER] button on
remote control.
2.To cancel, press [0]
on remote control.
In this mode,ensure the CD is in the
main unit.
To determine CD Mechanism Unit
(DLS6C) Open/Close & Access Inner &
Outer Disc Operation.
In this mode,ensure the CD is in the
main unit.