46
Step 4 Solder pins of the Diode (D5801) on the solder side of
the SMPS P.C.B..
Step 5 Solder pins of the Heatsink B.
10.24. Replacement of Diode (D5802)
• Refer to “Disassembly of SMPS P.C.B.”.
10.24.1. Disassembly of Diode
(D5802)
Step 1 Desolder pins of the Diode (D5802) on the solder side of
the SMPS P.C.B.
Step 2 Remove 1 screw at the Diode (D5802).
Step 3 Remove the Diode (D5802) from the SMPS P.C.B..
Caution: Avoid touching the Heatsink B due to its high
temperature after prolong use. Touching it may lead to
injuries.
To Next Page
Loading...
