Panasonic SA-MAX200PH - Disassembly of CD Interface P.C.B

47
10.24.2. Assembly of Diode (D5802)
Step 1 Apply grease to the Heatsink B.
Step 2 Screw the Diode (D5802) to the Heatsink B.
Caution: Ensure the Diode (D5802) is tightly screwed to the
Heatsink B.
Step 4 Solder pins of the Diode (D5802) on the solder side of
SMPS P.C.B..
10.25. Disassembly of CD Interface
P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.
• Refer to “Disassembly of CD Mechanism Unit”.
Step 1 Remove 3 screws.
Step 2 Desolder pins of the motor (M7301).
Step 3 Desolder pins of the motor (M7302).
Step 4 Remove the CD Interface P.C.B..