Panasonic SA-MAX3500PU - Service Mode Operations; Cold-Start Procedure

13
6 Service Mode
6.1. Cold-Start
6.2. Sales Demonstration Lock Function
FL Display
Key Operation
Front Key
Item
DescriptionMode Name
Cold Start To carry out cold-start or initialize
to shipping mode
1. Unplug AC power cord.
2. Press & hold [ /I]
on main unit.
3. Plug in AC power cord
while [ /I] button on main
unit being pressed.
4. Release [ /I] button on
main unit.
button
Entering into
Sales
Demonstration
Lock Mode
To enter into sales demonstration
lock mode.
The display will show upon
entering into this mode for
2 sec.
Note: [ ]
button is invalid and the main
unit displays "LOCKED" while
the lock function mode is
entered.
Cancellation of
Sales
Demonstration
Lock Mode
To cancel sales demonstration
lock mode.
1. Turn on the unit.
2. Select to CD mode function.
3. Set volume to Vol 0.
4. Press and hold
[ ] and [SELECT]
keys on main unit for 5 sec
or more.
The display will show upon
entering into this mode for
2 sec.
FL Display
Key Operation
Front Key
Item
DescriptionMode Name
1. Turn on the unit.
2. Select to CD mode function.
3. Set volume to Vol 0.
4. Press and hold
[ ] and [SELECT]
keys on main unit for 5 sec
or more.