Step 3 Remove 1 screw at Rectifier Diode (D5803).
Step 4 Remove the Rectifier Diode (D5803) from SMPS P.C.B..
Caution: Avoid touching the Heatsink B due to its high
temperature after prolonged use. Touching it may lead to
injuries.
Assembly of Rectifier Diode
(D5803)
Step 1 Apply grease to the Heatsink B.
Step 2 Screw the Rectifier diode (D5803) to the Heatsink B.
Caution: Ensure the Rectifier Diode (D5803) is tightly
screwed to the Heatsink B.
Step 3 Fix the Heatsink B with Rectifier Diode (D5803) on
SMPS P.C.B.
Caution: Ensure pins of the Rectifier Diode (D5803) are
properly inserted into the SMPS P.C.B..
Step 4 Solder pi
ns of the Rectifier Diode (D5803) on the solder
side of the SMPS P.C.B.
Step 5 Solder pins of the Heatsink B..
To Next Page
Loading...
