BA_PH_690-100_EN_10-22.docx
16.4 Cross-Cut & Mitre Fence Super Gehrfix I
The combined mitre and cross-cut fence Super Gehrfix I is suitable for angle cuts from 45° to 135°. Whole de-
grees and intermediate degrees are available for the angles 67.5/78.75/101.25/112.5°. Automatic length com-
pensation takes place via a stainless steel grid curve.
To use the Super Gehrfix I it is mandatory to use a saw blade with a thickness of 3.2 mm.
Figure 59: Super Gehrfix I
16.4.1 Features
• Allows infinite adjustment of the mitre angle
• Whole degrees and intermediate degrees adjustable
• Fixing points for 90° angles at the front and rear of the cross slide
• Automatic length compensation via grid curve
• Can be combined with the standard cross-cut fence or the optional Tele-Digit
• Art. No.: 4315
To Next Page