BA_PH_690-100_EN_10-22.docx
This operating manual applies exclusively to the PANHANS
sliding table saw type 690|100. The purpose of this document
is to acquaint the user with the machine and enable him to
use it to the full extent of its intended capabilities. Additional-
ly it contains important information to operate the machine
safely, properly and economically. Observance of the manual
helps to avoid hazards, reduce repair costs and downtimes
and increase the reliability and service life of the machine.
Furthermore, this operating manual serves to supplement
instructions based on national regulations for accident pre-
vention and environmental protection.
Apart from the operating manual and the legally binding accident prevention provisions applicable in the coun-
try and place of use, the recognized technical regulations for safe and proper work must also be observed.
This operating manual must always be available at the place of use of the machine. It must be
read and followed by every person who is assigned to work on the machine, e.g.
• during operation, including set-up, troubleshooting in the work process, removal of produc-
tion waste and maintenance,
• during maintenance (servicing, inspection, repair)
• and/or during transport.)
1.1 Legal Notice
All contents of these operating instructions are subject to the rights of use and copyright of Hokubema Maschi-
nenbau GmbH. Any reproduction, modification, further use and publication in other electronic or printed me-
dia, as well as their online publication, requires the prior written consent of Hokubema Maschinenbau GmbH.
1.2 Illustrations
All photos, figures and graphics contained in this document are for illustration and better understanding only
and may differ from the current state of the product.
2 Symbols
2.1 General Symbols
Indicates passages within this operating manual that must be particularly observed in order to
prevent malfunctions or damage to the machine.
Refers to chapters, sections, or figures within this document.
Refers to an external document or a third-party source.
To Next Page
Loading...