BA_PH_690-100_EN_10-22.docx
19.4 Slide Table and additional Supports
REMOTE LOCKING OF
THE SLIDE TABLE
For blocking the top slide table at a grid spacing of 70 mm.
CUTTING LENGTH OF
SLIDE TABLE 2000 MM
Instead of the 3200 mm standard cutting length.
CUTTING LENGTH OF
SLIDE TABLE 2600 MM
Instead of the 3200 mm standard cutting length.
CUTTING LENGTH OF
SLIDE TABLE 3800 MM
Instead of the 3200 mm standard cutting length.
ADDITIONAL SUPPORT
FOR LARGE PLATES
Can be hooked on the slide table, length 500 mm.
SWIVEL TABLE SUPPORT
WITH PLASTIC ROLLER
Adjustable as table extension in the infeed or outfeed area, attached
to the aluminium double slide table.
SWIVEL-AWAY DEVICE
FOR THE CROSS SLIDE
Quick ergonomic sliding into the parking position.
750 X 400 mm for optional cutting width of 800 mm; as additional
table support next to the standard table extension.
750 X 600 mm for optional cutting width of 1030 mm; as additional
table support next to the standard table extension.
750 X 890 mm for optional cutting width of 1280 mm; as additional
table support next to the standard table extension.
EXTENDABLE SUPPORT
ROLLER ON CROSS SLIDE
To Next Page
Loading...