BA_PH_690-100_EN_10-22.docx
Laser indicator for the cutting kerf, mounted on the guard.
For connecting external additional components (e.g. power feeder).
Integrated in the table extension.
Minimum quantity lubrication for aluminium and plastics machining.
For grease supply to all lubrication points of the machine via hand
pump. With 400 g grease cartridge and max. 350 bar output pressure.
220 V / 50 Hz max. 7.5 kW
CIRCULAR SAW
POWER FEEDER 76
For attachment to the rip fence.
You will find spare parts such as circular saw blades, push bars, push handles, guards and other accessories for
your sliding table saw in our online store https://www.hokubema.com.
Use only tools, accessories and spare parts specified by the manufacturer. The use of other tools,
accessories or spare parts may cause injury to persons and damage to the machine. The manu-
facturer accepts no liability for any damage resulting from the use of tools, accessories or spare
parts not specified by the manufacturer or from additional components supplied by third parties!
To Next Page
Loading...