Paradox EVOHD+ User Manual

EVOHD+ Installation Guide
51
VDMP3 Setup Instructions
Step
EVOHD+
section
English
1
Enable
Functions
Select the following options to enable voice reporting and arm/disarm
function.
[3090]
[1] Voice module incoming call (default 1 and 2 ON)
[2] Voice reporting
[3] Report AC/battery trouble
[4] Inhibit disarming on voice module
2
Te le ph one
Numbers
Program up to 8 telephone numbers which will be called in sequence in
the event of an alarm. Telephone numbers should be programmed in
priority sequence as the VDMP3 will start with telephone number 1. For
extra key functions, see Special Telephone Number Keys on page 45.
[3091]
to
[3098]
[3091] Telephone number 1 [3095] Telephone number 5
[3092] Telephone number 2 [3096] Telephone number 6
[3093] Telephone number 3 [3097] Telephone number 7
[3094] Telephone number 4 [3098] Telephone number 8
3
Enable
Numbers
Choose which telephone numbers will be enabled for each partition in
your system. Options [1] to [8] represent telephone numbers 1 through
8.
(Default: Telephone number 1 is enabled for all partitions.)
[3133]
to
[3833]
[3133] Partition 1 [1] to [8] [3533] Partition 5 [1] to [8]
[3233] Partition 2 [1] to [8] [3633] Partition 6 [1] to [8]
[3333] Partition 3 [1] to [8] [3733] Partition 7 [1] to [8]
[3433] Partition 4 [1] to [8] [3833] Partition 8 [1] to [8]
4
Answering
Machine
Override
If the VDMP3 uses a telephone line that is connected to an answering
machine or service, the Answering Machine Override must be
programmed. The value programmed in section [3052] represents the
delay period that the VDMP3 will wait between the first and second call.
The user must call the VDMP3, hang up, and then call back within the
value programmed in section [3052]. The module then overrides the
answering machine or service by picking up the line on the first ring.
[3052]
000 to 225 seconds (default 008)
Note: Changing these values will also affect PC
communication via
BabyWare software.
5
Enable
Features
(PGM)
Features in this section correspond to utility key PGMs in the EVOHD+
control panel. For more information, see Feature Activation (PGMs).
[3087]
Options [1] to [8] represent features 1 to 8 (default: OFF)
6
Message
Delay
After the VDMP3 dials a phone number, it waits the programmed delay
period before sending the voice message. The value programmed in
section [3088] represents the length of time the VDMP3 will wait before
playing the message.
[3088]
000 to 127 seconds (default 003)
7
Message
Repetitions
Set the number of times the VDMP3 will play the voice message.
[3089]
000 to 008 repetitions (default 008)
8
Delay
Before Next
Number
Set the delay before the VDMP3 attempts to dial the next number on the
list.
[3054]
000 to 255 seconds (default 020)
Note: Changing these values will also affect regular
reporting to monitoring station.
9
Ring
Counter
Set the number of rings the VDMP3 will wait before the call is answered.
[3051]
000 to 008 rings (default 008)
Note: Changing these values will also affect PC
communication via
BabyWare software.

Paradox EVOHD+ Specifications

General

Brand	Paradox
Model	EVOHD+
Category	Security System
Language	English