6
EVOHD+ Installation Guide
Control Panel (UL compliant systems)
AC Power: 16Vac, 40/75VA, 60Hz
Battery: 12Vdc, 7Ah minimum
Auxiliary Power: 0.6A typical, 1.0A maximum, fuseless shutdown at 2.5A
Bell Output: 11.4 to 12.5Vdc, 1A maximum, fuseless shutdown @ 3A
PGM Output: PGM1 to PGM4 100mA solid-state relays with +/- trigger, PGM5 Form C relay output rated at 3A/28Vdc N.O. / N.C.
Humidity: 5 - 90%
All control panel outputs are rated to operate between 11.4Vdc and 12.5Vdc
Specifications may change without prior notice. For latest product specifications and standards, please visit www.paradox.com.
EN 50131 Compliancy
In order to meet with EN 50131 compliancy, you will require the following:
•EN Metal Box
• TK278 Tamper kit
Standards: EN50131-1 Security Grade 3, Environmental Class II; EN 50131-3; EN 50131-6 Type A - use a 9Ah battery; EN 50131-5-3 (for RTX3);
EN 50136-1 SP2; EN 501036-2 for on-board PSTN.
For more details on how to set up your panel for EN compliancy, please refer to the EVOHD+ Programming Guide.
To Next Page
Loading...
Need help?
General
