Parker 890CD - Intended Users; Application Area; Personnel

Safety
Page 1-2 890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Requirements
IMPORTANT Please read this information BEFORE installing the equipment.
Intended Users
This manual is to be made available to all persons who are required to install, configure or service
equipment described herein, or any other associated operation.
The information given is intended to highlight safety issues, and to enable the user to obtain maximum
benefit from the equipment.
Complete the following table for future reference detailing how the unit is to be installed and used.
INSTALLATION DETAILS
Model Number
(see product label)
Where installed
(for your own information)
Unit used as a:
(refer to Certification)
R Component R Relevant Apparatus
Unit fitted:
R Wall-mounted R Enclosure
Application Area
The equipment described is intended for industrial motor speed control utilising AC induction or AC
synchronous machines.
Personnel
Installation, operation and maintenance of the equipment should be carried out by qualified personnel. A
qualified person is someone who is technically competent and familiar with all safety information and
established safety practices; with the installation process, operation and maintenance of this equipment; and
with all the hazards involved.