Technical Specifications
Page E-2 890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
11
B
C
D
1
2
3
4
5
6
7
E
Understanding the Model Number
Each unit is identified using an alphanumeric code which records how the unit was configured when
dispatched from the factory. Each block of the Model Number is identified as below using a 7 block short
code (shaded) and a 9 or 12 block long code. The short code defines the "base build" product and the long
code defines the configuration including options.
Example Model Number:
Block 1
890SD
This is a standard 890SD Standalone Drive
Block 2
5
Nominal input voltage rating is 500V
Block 3
0045D
Current rating (continuous output RMS Amps) : 45 Amps
Physical frame size D
Block 4
B
Supplied with braking control - external resistors required
Block 5
00
Build Option : not applicable
Block 6
A
Advanced performance level
Block 7
US
Destination is United States (English documentation and 60Hz settings)
Block 8
00
SSD standard livery
Block 9
00
Special options : none fitted
Block 10
EQ
Feedback Option : Encoder Quadrature incremental
Block 11
PB
Communications Option - Slot A: ProfiBus
Block 12
FA
Communications Option - Slot B: FireWire IEEE 1394A
SHORT CODE
LONG CODE
Not applicable to
890CS and 890CA units
890SD/5/0045D/B/00/A/US/00/00/EQ/PB/FA
To Next Page
Loading...
