Particle Measuring Systems LASAIR II 550L Operator's Manual


Page Page M-4 M-4 LASAIR LASAIR II II Operator’s Operator’s ManualManual
Appendix M: TouchRamAppendix M: TouchRam
Compatibility With MiniLaz ButtonsCompatibility With MiniLaz Buttons
The LASAIR II is compatible with MiniLaz TouchRAM buttons, but there areThe LASAIR II is compatible with MiniLaz TouchRAM buttons, but there are
some differences. In general, buttons written by the MiniLaz can some differences. In general, buttons written by the MiniLaz can be used by thebe used by the
LASAIR II. When a LASAIR II format button is scanned bLASAIR II. When a LASAIR II format button is scanned by a MiniLaz, it isy a MiniLaz, it is
ignored.ignored.
MiniLaz buttons have the following characteristics:MiniLaz buttons have the following characteristics:
••
they support the first 5 channels of particle alarms, but do not support particlethey support the first 5 channels of particle alarms, but do not support particle
alarms on the LASAIR alarms on the LASAIR II’II’s largest channels largest channel
•• particle particle alarms alarms in metrin metric units ic units written written by the by the MiniLaz cannot MiniLaz cannot be converted be converted toto
meaningful LASAIR II alarmsmeaningful LASAIR II alarms
•• supports temperature and rh alarms, but not user analog channel alarmssupports temperature and rh alarms, but not user analog channel alarms
••
the PMS address can be readthe PMS address can be read
Comparison of LASAIR II to MiniLaz ButtonsComparison of LASAIR II to MiniLaz Buttons
The LASAIR II button format offers the following advantages The LASAIR II button format offers the following advantages over a MiniLazover a MiniLaz
button format:button format:
••
Location names may be 16 characters rather than 7Location names may be 16 characters rather than 7
•• The purge delay time is recordedThe purge delay time is recorded
•• The time-of-day start option is recordedThe time-of-day start option is recorded
•• TheThe Sample by Volume/Sample by TimeSample by Volume/Sample by Timesetting is recordedsetting is recorded
•• Alarm buzzer on/off is recordedAlarm buzzer on/off is recorded
•• Differential particle alarms may be usedDifferential particle alarms may be used
•• SupportsSupportsPrint Sample AverPrint Sample Averageagefeaturefeature
•• Support for network parametersSupport for network parameters
LASAIR II TouchRAM Button Data FormatLASAIR II TouchRAM Button Data Format
The following data are written on LASAIR II buttons:The following data are written on LASAIR II buttons:
[ANALOG_SETUP_P[ANALOG_SETUP_PARAMETERS] This group is noARAMETERS] This group is not supported in t supported in recipesrecipes
T_RH ENABLEDT_RH ENABLED
TRH_UNITSTRH_UNITS
AAnnaalloogg11__EEnnaabblleedd AAnnaalloogg33__EEnnaabblleedd
AAnnaalloogg22__EEnnaabblleedd AAnnaalloogg44__EEnnaabblleedd
[SAMPLING_SETUP][SAMPLING_SETUP]
IInntteerrSSaammpplleeDDeellaayy SSaammpplleeTTiimmee NNuummbbeerr__OOff__SSaammpplleess
SSaammppllee__NNoorrmmaalliizzeedd CCoonnttiinnuuoouus ss saammpplliinng mg mooddee LLooccaattiioonn
SaSampmpleleVVololumumeCeCF F or or CMCM EnEnabablele_S_Samamplple_e_ByBy_T_Timimee SaSampmplelePuPurrgegeTTimimee
SSaammppllee__UUnniittss GGrroouup p RReeppeeaat t EEnnaabblleedd

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English