Particle Measuring Systems LASAIR II 550L Operator's Manual


Password and Remote Access SecurityPassword and Remote Access Security
LASAIR II Operator’s ManualLASAIR II Operator’s Manual
PagePage
5-215-21
The password that is set at the The password that is set at the instrument is specific to the instrument and is theinstrument is specific to the instrument and is the
same password that users must enter when accessing the LASAIR II from a websame password that users must enter when accessing the LASAIR II from a web
browser, Facilitbrowser, Facility Net, or Pharmaceutical Net.y Net, or Pharmaceutical Net.
Remote access from a web browser or from a Remote access from a web browser or from a facility management programfacility management program
such as Facility Net (or Pharmaceutical Net) casuch as Facility Net (or Pharmaceutical Net) can be disabled at the n be disabled at the instrument’instrument’ss
Comm Setup ScreenComm Setup Screen..
To set and enable a password:To set and enable a password:
11 From the Main Display Screen press the From the Main Display Screen press the Main Setup Screen softkey. TheMain Setup Screen softkey. The
Main Setup Screen will open.Main Setup Screen will open.
22
Press the Enter button to enable the Press the Enter button to enable the Edit Mode.Edit Mode.
33 Press the Tab softkey until you reach the Change Password button.Press the Tab softkey until you reach the Change Password button.
44
Press the Enter key. ThePress the Enter key. The
Enter New PasswordEnter New Password
dialog box will open.dialog box will open.
55 Use the Up or Down arrow buttons and Use the Up or Down arrow buttons and the softkeys to enter a password. Thethe softkeys to enter a password. The
password may be password may be 16 alphanumeric characters 16 alphanumeric characters including the underscore and including the underscore and thethe
blank characters.blank characters.
66 Use the Tab softkey to move to the OK button and then Use the Tab softkey to move to the OK button and then press the Enter buttonpress the Enter button
to accept the to accept the password. The Vpassword. The Verify New Password dialog erify New Password dialog box will open.box will open.
77 Re-enter the password, tab to the OK button and press the Enter button to acceRe-enter the password, tab to the OK button and press the Enter button to acceptpt
the password. Thethe password. ThePassword ChangedPassword Changeddialog box will open.dialog box will open.
88
Press the Enter button to complete the acPress the Enter button to complete the action for that password.tion for that password.
99 If you are ready to enable password protection, navigate to the EnaIf you are ready to enable password protection, navigate to the Enable Passwordble Password
check box and then press the Enter button to insert a check mark.check box and then press the Enter button to insert a check mark.
Figure 5-12: Sampling Setup with Password Active but not EnteredFigure 5-12: Sampling Setup with Password Active but not Entered
Indicates a passwordIndicates a password
has been sethas been set

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English