PAX S90 User Manual

Chapter 6
How to Set the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 150
6.5.4 Battery Saver
Note
This function is for wireless terminals and for models equipped with
back-up batteries, or else “NOT AVAILABLE” is displayed
Example: I want my wireless terminal to turn off if not used for three
minutes. I enabled the Battery Saver function with an idle time of 180
seconds.
POS TERMINAL MODEL
OPTION
DESCRIPTION
Wireless & Back-up Battery
OFF
Battery Saver is OFF
Wireless & Back-up Battery
Auto Off Only
Terminal is off (wireless modem
stays on)
Wireless
Radio & Auto Off
Terminal and modem are off
STEP
ACTION
DISPLAY
1.
From the Operation Settings menu, press [4] for
Battery Saver.
2.
The default setting is Auto Off Only.
The current setting is displayed in the first line.
Use the [▲] & [▼] keys to make your selection and
then press [ENTER].
OR, Press the number corresponding with your
selection.
3.
Press [ENTER] to accept the change.
OR
Press [CANCEL] to cancel and back to Operation
Settings menu.
4.
Enter the idle time in seconds then press [ENTER].
5.
Stop.
BATT SAVER:1
1. OFF
2. Auto Off Only
3. Radio+Auto Off
ARE YOU SURE?
ENTR=YES, CANC=NO
OPER. SETTINGS:
1. No-Paper Mode
2. Buzzer Setup
3. Operation Mode
4. Battery Saver
IDLE TIME: [sec]

PAX S90 Specifications

General

Brand	PAX
Model	S90
Category	Payment Terminal
Language	English