PAX S90 - Host Phones

Chapter 6
How to Set the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 163
6.6.2 Host Phones
Note
This function is used for editing host parameters.
STEP
ACTION
DISPLAY
1.
Input the Password and press [ENTER].
2.
From the Hosts Settings menu press [2] to enter
host phones.
3.
Scroll to select the host then press [ENTER].
4.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
5.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
6.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
HOST PARAMS:
1. Host Parameters
2. Host Phones
3. Print EDC Setup
4. Host URL Params
PHONE TYPE:
1. Auth. Phones
2. Batch Phones
SELECT HOST
1. Your Host
2. Your Other Host
PHONE SETTINGS:
1. Number
2. Baud Rate
EDIT PHONE:
1. Phone #1
2. Phone #2
3. Phone #3
ENTER PASSWORD: