PAX S90 - Predial Call

Chapter 6
How to Set the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 190
6.7.4 Pre-Dial Call
Note
This feature provides the user options of whether to enable the Pre-Dial
Call function or not. If it is enabled, terminal will make a pre-dial call to
the host.
STEP
ACTION
DISPLAY
1.
From the System Settings menu, press [5] for
Pre-Dial Call.
2.
Scroll through the EDC Type options then press
[ENTER] to select.
OR
Press the number corresponding with your
selection.
3.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
4.
Stop.
PreDial Call
1. Predial OFF
2. Predial ON
3. Predial on SWIPE
SYSTEM OPTIONS:
1. Date/ Time Setup
2. Batch Number
3. Working Mode
4. Pre-Dial Call
SELECT PMT TYPE:
1. ALL
2. CREDIT
3. DEBIT
4. EBT