PAX S90 User Manual

Chapter 6
How to Set the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 169
6.6.5 AutoDial Setup
Note
The AutoDial function is the automatic execution of the manual batch
process. If the terminal capture type is Host Manual or Terminal
Capture, the AutoDial feature will automatically perform the manual
batch function. AutoDial is not applicable if the terminal capture type is
Autobatch.
Example: Since I don’t always have time to batch the terminal at the
end of the business day, I set the AutoDial time to automatically batch
out an hour after the store closes.
STEP
ACTION
DISPLAY
1.
Input the Password and press [ENTER].
2.
From the Hosts Settings menu press [5] to enter
connection settings.
3.
Scroll to select the host then press [ENTER].
.
4.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
5.
If [1] is selected in step 4, enter the start time and
then press [ENTER].
6.
Enter the stop time then press [ENTER]. Stop time
is usually one hour after start time.
HOST PARAMS:
2. Host Phones
3. Print EDC Setup
4. Host URL Params
5. AutoDial Setup
SELECT HOST
1. Your Host
2. Your Other Host
AUTODIAL SETUP: 2
1. OFF
2. ON
_____________________
START AD AT:
HH:MM
_____________________
_____________________
STOP AD AT:
HH:MM
_____________________
ENTER PASSWORD:

PAX S90 Specifications

General

Brand	PAX
Model	S90
Category	Payment Terminal
Language	English