PAX S90 User Manual

Chapter 6
How to Set the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 168
6.6.4 Host URL Params
Note
This function is used for IP address and Port editing manually in the
terminal.
STEP
ACTION
DISPLAY
1.
Input the Password and press [ENTER].
2.
From the Hosts Settings menu press [4] to enter
connection settings.
3.
Scroll to select the host then press [ENTER].
4.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
5.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
6.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
7.
Input the desired URL address or port number then
press [ENTER].
8.
Stop.
HOST PARAMS:
1. Host Parameters
2. Host Phones
3. Print EDC Setup
4. Host URL Params
SELECT HOST
1. Your Host
2. Your Other Host
PHONE TYPE:
1. Auth. URLs
2. Batch URLs
URL SETTINGS:
1. URL
2. Port
_____________________
Host URL:
_____________________
EDIT URL:
1. Host URL #1
2. Host URL #2
ENTER PASSWORD:

PAX S90 Specifications

General

Brand	PAX
Model	S90
Category	Payment Terminal
Language	English