PAX S90 - Configuration

Chapter 6
How to Set the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 202
6.7.8.3 Configuration
Note
Use this function to configure the communication parameters of the App
Load application, and Phone Setting is the function that allows user to
set phone number to link to the BroadPOS Terminal Server.
STEP
ACTION
DISPLAY
1.
From the System Settings menu, press [9] to
Select the App Management.
2.
Input the Password and press [ENTER]
3.
Press [3] for Configuration.
4.
Press [1] to set Server URL and skip to Step 5.
Press [2] to set Server Port and skip to Step 6.
Press [3] for Phone Settings. Please refer to Host
Phones.
5.
Set Server URL and press [ENTER].
6.
Set Server Port and press [ENTER].
7.
Stop.
SERVER PORT
▋
SERVER URL
▋
CONFIGURATIONS
1. Server URL
2. Server Port
3. Phone Setting
SYSTEM OPTIONS:
6. Database
7. Pin Pad Settings
8. Keys Injection
9. App Management
APP LOAD
1. Activate
2. App Update
3. Configuration
4. Terminal SN
ENTER PASSWORD: