PAX S90 - Credit Void Post-Auth

Chapter 4
How to Do Transaction
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 36
4.1.8 Credit Void Post-Auth
Note
A Post-Auth sale can be VOIDED if the transaction is in the current
open batch. A VOID/POST-AUTH does remove any hold on the
customer’s open-to-buy.
Example: X planned to go to Haiwii to have a trip and he had booked a
room at a hotel through Credit Auth. And when he arrived the hotel, he
had a Credit Post-Auth transaction to pay for his room. But before he
steps in to his room, call comes and he has to go back to US. So he
want to cancel the room. He requires the clerk to return the money.
Then the clerk does a Credit Void Post-Auth transaction to return the
money to X’s credit account. Then X goes back to US.
STEP
ACTION
DISPLAY
1.
From the Idle prompt use the [UP/DOWN] or
[SHORTCUT] button until V/FRCD displays.
1.1 3
If Void Forced is password protected, the terminal
will prompt for the manager password. When
prompted, enter the password and then press
[ENTER].
2.
Swipe the credit card or key in the account number and expiration date
manually.
2.1 2
.
1
If the security for Card Manually Entry is on, the
terminal will prompt for the manager password.
When prompted, enter the password and then
press [ENTER].
If Step 1.1 appeared, there will be no this step.
2.2
Manually keying the full account number then press
[ENTER]. The account number must be between
13-16 digits.
ENTER PASSWORD:
ENTER PASSWORD:
INPUT ACCOUNT
CREDIT
V/POST
CREDIT V/POST
5555